SX-ULPGN-EVK

Evaluation kit for Ultra-Low-Power Hostless Wi-Fi IoT Module

The SX-ULPGN-EVK is an evaluation kit for our ultra-low-power hostless Wi-Fi IoT module, the SX-ULPGN based on Qualcomm's QCA4010 chipset.

QCA4010-Based Evaluation Kit

SX-ULPGN-EVK is an ultra-low-power 802.11b/g/n hostless Wi-Fi IoT evaluation kit. It enables rapid development of cost-effective Wi-Fi connectivity for embedded devices. It features the SX-ULPGN module and access to the module’s bootstrap options, mode configuration, interface extension, peripheral access and power supply. SX-ULPGN-EVK brings out the UART, SPI, I2C, I2S, PWM, ADC, JTAG, and GPIO interfaces of the module. SX-ULPGN-EVK can
also be used for module manufacturing test

The SX-ULGPN-EVK Evaluation Kit provides mode configuration, interface extension, peripheral access and
power supply for the SX-ULPGN module. Different boot and function modes of SX-ULPGN module are
configured on the SX-ULPGN-EVK.
  • Wireless Connectivity
  • AP Scan, WPA Configuration
  • TCP/IP Function with HTTP, DNS and SNTP
  • Soft Access Point (AP), WPA Client
  • Modes: Station, AP, and P2P (Wi-Fi Direct)
  • Authentication:Open System WPA-PSK (WPA2-PSK)
  • Encryption: TKIP, and AES
  • JTAG Debugging
  • Over-the-Air (OTA) Programming

SX-ULPGN-EVK ships with the following:

  • SX-ULPGN Evaluation Assembly
  • Silex Evaluation Firmware Image
  • USB-to-UART Cable Assembly for UART & Power (+5V)
  • Quick Start Guide Insert