Wireless USB Device Server

DS-700AC      

IPv4/IPv6 support Wireless USB 3.0 Device Server with Enterprise Security

The Silex DS-700AC is designed to connect and share USB devices over a wireless network easily. Printers, scanners, disk drives, card readers, or virtually any other USB device can now be enabled with wireless network connectivity. It allows flexibility to place the USB device anywhere on the network instead of being attached directly to the computer, and multiple users can access the USB device.

USB 3.0 Wireless USB Device Server

Unleash your USB devices to your wireless network with Enterprise security

USB Device Connectivity over Wireless Network

ds-700ac connectivity

 

Enterprise Security for Wi-Fi network

The DS-700AC supports Wi-Fi WPA3-Enterprise security. The latest Wi-Fi security can protect the wireless network. It also supports legacy Wi-Fi security such as WPA/WPA2-Enterprise. For personal use, it supports WPA/WPA2/WPA3-Personal, too.

ds-700ac radius

 

Equipment Sharing from Two Different Networks

Office equipment deployed in a network now can join another network keeping two networks still isolated. The DS-700AC can convert a USB device port of the equipment to the wireless network port.

ds-700ac additional network

 

High Data Bandwidth

The DS-700AC USB 3 SuperSpeed port provides higher bandwidth over gigabit Ethernet LAN than the legacy USB 2.0 device server. Data transfer from USB devices will complete much faster than ever.

ds-700ac performance

* The chart shows the data rate over the wired LAN.

Various Device Support

Isochronous transfer support

USB devices such as a USB web camera and USB speaker, which use the isochronous transfer, can be connected over the network.

Standard TCP/IP Printing (LPR/RAW) support

The DS-700AC operates as the print server when a printer is connected. The print server supports Raw printing mode and LPR, which are popular network printing protocols.

 

SX Virtual Link

SX Virtual Link is software to access USB devices attached to the USB device server over the network. The software allows users to request other users to release the shared USB device when they want to use it.

svl_screenshort 

 

Easy Configuration for Quick Installation

The configuration of the DS-700AC is easy and quick through "Device Server Setup" utility, an integrated configuration web page, or AMC Manager®. 


ds-700_config

 


Model number DS-700AC
Wired LAN

RJ-45: x 1

10Base-T/100BASE-TX/1000BASE-T (Auto detection)

Wireless LAN

Dual band 802.11a/b/g/n/ac wave2 2T x 2R MU-MIMO

Wi-Fi Security

Authentication: WPA3-Enterprise, WPA2-Enterprise, WPA/WPA2-Enterprise, WPA3-Personal, WPA2-Personal, WPA/WPA2-Personal, Open

Encryption: WEP, AES, Auto

Device Interface

USB Std-A x 2 (USB 3.0 x 1, USB 2.0 x 1)

Switch

Push switch x 1

LED

RJ-45: x 2

Security features

USB device connection password protection

IP address filter

Port filter

Storage Temperature

Humidity

-10 ~ + 50°C

20 ~ 90% RH

Operating Temperature

Humidity

0 ~ + 40°C

20% ~ 80% RH (non-condensing)

Power

DC Jack 12V

Maximum Power consumption

5.4W (DC12V, 0.45A) excluding USB Vbus power

Regulatory Compliance FCC Class B, ICES Class B, CE Class B, VCCI Class B, RoHS
Supported software

SX Virtual Link

Device Server Setup

AMC Manager®

Supported OS

Windows 10 (32/64bit)
Windows 8/8.1 (32/64bit)
Windows 7 (32/64bit)
Windows Server 2019, Windows Server 2016
Windows Server 2012R2, Windows Server 2012
Windows Server 2008R2

Dimensions

110mm x 109mm x 27mm

Weight

135g (body)

Warranty

5 years

Note

Limitation of USB 3.0 port:

support only USB device connection. Please use USB 2.0 port to connect USB HUB.

USB display adapter is not supported

 

Software:

USB Device Server Setup
Click the above link to download the USB device server setup utility. The utility is to set up your USB device server easily for your initial use. It also contains SX-Virtual Link installer and SX-Virtual Link Lite installer.

SX-Virtual Link / SX-Virtual Link Software as a Service Downloads
Click the above link to download the SX-Virtual Link installer when you have already set up your USB device server and are looking for the latest software.

AMC Manager
Click the above link to download the AMC Manager installer. AMC Manager provides you with a convenient user interface to configure your USB device servers.

Firmware:

DS-700AC Version 1.1.2

Release Note:  

- Patch for FragAttacks
- Modified failure of firmware update with AMC Manager.
- Fix errrors when irregular operations are identified.

Warranty and RMA's:

Limited Warranty and RMA (Return Merchandise Authorization) Policy

You may also be interested in

DS-700

DS-700_250px

A non-wireless version of DS-700. The DS-700 provides USB device connectivity over your wired LAN. When you install your USB device near an Ethernet hub, the DS-700 bridges your USB device to the wired network.

BR-500AC

br-500ac-product-img

802.11ac wave2 2x2 MU-MIMO Ethernet to Wi-Fi bridge. The BR-500AC provides enterprise-class security and wireless connectivity to any equipment with an Ethernet port. Seamless operation and easy installation.