This guide explains how to evaluate the SX-PCEAX-AP dual-band Wi-Fi 6 M.2 module with the NXP i.MX8MM board. It includes steps to start the evaluation using an optimized image with our Silex reference driver for the QCN9072 Wi-Fi module.

• Prerequisites 
• Requirements
• Hardware Setup
  • i.MX8MM
• Evaluation Software
  • Downloading the EVK Image (T.B.D.)
  • Creating a Bootable SD Card
• Preparation for Testing
  • Setup and First Boot
  • Load the wireless driver
  • Set Country code
  • AP mode
  • Communication Check Using Ping Command
  • Run Throughput Test
  • About M.2 edge to mini-PCIe connector Conversion Board