SX-SDMAH (US)

World's Farthest Reaching Wi-Fi HaLow

802.11ah Wi-Fi- HaLow SDIO/SPI module

SX-SDMAH US version is an 802.11ah Wi-Fi HaLow SDIO/SPI module enabled by Morse Micro’s MM6108. It features a host SDIO or SPI interface to operate with a processor or a microcontroller. It supports up to 8MHz channel bandwidth to improve the maximum data throughput in the countries allowing 8MHz usage. Its small footprint design with the integrated antenna connector saves the PCB space and allows a more flexible embedded system design. The SX-SDMAH also features high-transmission power to gain more distance and coverage.​

* SX-SDMAH-R2 is recommended for new design while SX-SDMAH is continued to be supported.

802.11ah Wi-Fi HaLow™ SDIO/SPI module with enhanced features for hosted embedded systems

The SX-SDMAH features higher transmission power than other Wi-Fi HaLow modules enabled by MM6108 IC. It ensures the best performance in its data throughput over long distances and also provides wide coverage of Wi-Fi HaLow radio signal.

SX-SDMAH-R2 is newly introduced

The SX-SDMAH-R2 reduces the power consumption in its deep sleep mode by 98% from the SX-SDMAH keeping its transmission power and industrial operating temperature support.

Data transfer over further distances

The SX-SDMAH features higher transmission power than other Wi-Fi HaLow modules enabled by MM6108 IC. It ensures the best performance in its data throughput over long distances and also provides wide coverage of Wi-Fi HaLow radio signal.

Improved data throughput

The SX-SDMAH supports up to 8MHz channel bandwidth to allow data transmission at up to 32.5Mbps PHY bit rate. It will improve the user experience with Wi-Fi HaLow in regions where 8MHz channel bandwidth usage is allowed. Improved data throughput also enhances the experience with a large-scale IoT network.

SDIO host interface for Linux OS
The SDIO host interface has been widely used in legacy Wi-Fi systems. The SX-SDMAH offers more options for the embedded system design. It also eliminates a performance constraint with certain processors with SPI interfaces.

SPI host interface for RTOS
The SX-SDMAH supports the SPI host interface for RTOS-embedded systems.

Small footprint
The SX-SDMAH is the small footprint module integrating the antenna connector to save PCB space and simplify the PCB design.

SKUs

Recommendation for new design:

SX-SDMAH-R2 (US)
SX-SDMAH-R2-SP (US)
SX-SDMAH-R2-EVK (US)
SX-SDMAH--R2-EVB (US)

Continue to manufacturing

SX-SDMAH (US)
SX-SDMAH-SP (US)
SX-SDMAH-EVK (US)
SX-SDMAH-EVB (US)

Chipset MM6108
Host Interface SDIO for Linux
SPI for FreeRTOS
Wi-Fi Standard 802.11ah Wi-Fi HaLow
Antenna  MHF1
Operating Voltage

VDD: 3.3V
VDDIO: 3.3V
VDDFEM: 3.3V or 5V

Operating Environment Temperature: -40 - 85°C
Humidity: 15% - 95% w/o condensation
Storage Environment Temperature: -40 - 85°C
Humidity: 15% - 95% w/o condensation
Dimensions 17mm × 18mm × 2.65mm
Weight 1.8g
Package Type

60-pin LGA

Modular Certification

US, Canada