SX-ULPGN

Ultra-Low-Power Hostless and Hosted Wi-Fi IoT Module with 802.11n Support

The SX-ULPGN is an ultra-low-power hostless Wi-Fi IoT module with 802.11 b/g/n support. This low power Wi-Fi IoT module is based on QCA4010 radio from Qualcomm. Our close relationship with Qualcomm and other partners enables us to provide support for our modules that is not available elsewhere.

Low-Cost IoT Device Connectivity

The SX-ULPGN is ideal for embedded wireless products including smart home and smart city devices, systems used in factory automation, appliances, sensors, wearables, medical devices, and products used for security, remote control and remote sensing. The SX-ULPGN module is an excellent choice for device OEMs looking to design Wi-Fi connected products in a cost-effective way.

This module is a feature-rich, intelligent Wi-Fi solution that integrates a full Wi-Fi stack, full networking/security stack, and embedded CPU and memory for on-chip application development.
  • IEEE 802.11b/g/n-compliant (2.4 GHz)
  • QCA4010 Radio
  • Single Stream System (1x1), 20 MHz
  • Integrated RF front end
  • PCB trace antenna
  • Hostless or hosted development options
  • AllJoyn support
  • Wi-Fi Protected Setup Support
  • Chipset: QCA4010 Radio
  • IEEE802.11b/g/n (2.4 GHz)
  • Interface: ART, SPI, I2C, I2S, PWM, ADC, JTAG, GPIO
  • Operating Temperature: 0 to +70C
  • Power supply: +3.3V
  • Integrated printed 2.4 GHz PCB antenna
  • Alljoyn Support
  • Dimensions: 30.00 x 16.00 x 2.6
  • FCC/IC/CE
SX-ULPGN Product Specification

Silex AT Command Set (Version 2.12.x)
EVK Quick Start Guide

Application Note:
FTDI JTAG Application Note
SX-ULPGN Over The Air (OTA) Firmware Upgrade Application Note

Develop Your SX-ULPGN Application

Evaluate Now