Silex Unwired

Add Ultra Low Power WiFi Using UART AT Command Set

Silex has released a new version (12.2.x) of our UART AT Command Set for Qualcomm's Ultra Low Power WiFi IoT Soc QCA4010. Our new product is called SX-ULPGN-EVK-AT. The SX-ULPGN-EVK-AT is an evaluation kit for our SX-ULPGN module based on the QCA4010. 

Using our new SX-ULPGN-EVK-AT, customers can quickly evaluate our AT Command Set. They can add a serial-to-Wi-Fi converter for their existing MCU based designs without porting any host driver. SX-ULPGN can offload the host MCU by performing all of the Wi-Fi related tasks such as low power WiFi network stack, security, and authentication.

SX-ULPGN-EVK-AT UART AT Command.jpg

Top Features:

JTAG OTA Programming Station and AP Modes
Open System WPA-PSK, WPA2-PSK None, WEP, TKIP, and AES(CCMP) Enrollee (PIN/PBC)
IPv4, IPv6, DNS, SNTP, HTTP SSL/TLS, DHCP, and WPS IEEE802.11 Power Save Mode
Suspend (Store Recall, Power Off Suspend(Sleep Wakeup, Host Deep Sleep) TCP/IP Offload
UDP Offload On-Boarding HTTP Server HTTP Client
DHCP Client and DHCP Server DNS Client and DNS Server Socket API for up to 4 UDP or TCP Client/Server Sockets

The SX-ULPGN-EVK-AT is the same hardware as SX-ULPGN-EVK, except:

  • The modules will be programmed with Silex AT Command Set Version 2.12.2
  • The module will be SX-ULPGN-2000-WW

Why SX-ULPGN-EVK-AT Is Useful?

  • External Host MCU Interface over High Speed UART
  • Supports the Use of Multiple UARTs
  • Separate Command/Data
  • Built-In Web Server
  • HTTPS
  • Use it to Evaluate RF Performance for Potential Hostless Applications

To Learn More about our IoT Connectivity Solutions cointact us us at sales@silexamerica.com

Download SX AT Command Specification